Make your own free website on Tripod.com
DANNY CALLAGHAN B.eng C.eng MIMechE
GALLERY
Home
CAREER TIME LINE
GALLERY
INTERESTS AND LEISURE

3 phase separator.jpg

3 Phase Separator Vessel
 
A mixture of gas, water and hydrocarbon liquids enter the vessel via the inlet nozzle in the domed head of the vessel. The fluid passes through static equipment installed in the vessel. At the Far end of the vessel cleaned gas exits the top nozzle. Water is collected in front of the weir and exits via the nozzle in front of the weir (blue). Oil rises above water and passes over the weir and exits the vessel downstream of the vessel.

cyclone2.jpg

vertical_cyclone_vessel.jpg

spinner.jpg

vertical_scrubber.jpg

Axial flow cyclone bundle.
Fitted across the diameter of the a vertical vessel this device removes liquid particles from a gas stream flowing upwards in the vessel. Oil residue is collected and removed via the drain pipe & manifold.

 
 
 
 
 
 
Gas Scrubbing Vessel
Fitted with a cyclonic inlet device and cyclonic demisting device

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
View showing an axial flow cyclone element.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Vertical 2 Phase Vessel
Wet Gas entering the inlet nozzle on the side of the vessel passes through a inlet distributor. Heavier particles of oil and other liquids fall under gravity to the bottom of the vessel. Lighter particles of liquids in the gas stream are removed first by a Mesh Pad type demister then by a vane type demister. Cleaned gas leaves the vessel via the top nozzle
 
 

cyclone2.jpg

Vessel internal : Cylonic gas/oil separator fitted to inlet nozzle
Mixture of gas/oil/water enters at top , is diverted through manifold then enters cylones. Gas separates and exits from top of cyclones, liquids pass to bottom of cyclone and then diverted through 180 degrees to exit through liquid outlet headers.
Model created in pro/engineer
assembly approx. 4m high